![]() After you have confirmed that all speakers play stimulus, then play the stimulus from the furthest left speaker again.Ensure that the device's firmware is also properly recognizing each speaker. ![]() If there is no noise playing from one or more speakers, make sure that your device is configured to the correct speaker configuration and that your speakers are connected to the device. Repeat this procedure for all speakers.If you cannot hear the stimulus, slowly raise the "Master output" level until you hear it. The speaker should now play a stimulus in the form of a pink noise or, if the speaker is a subwoofer, short sine sweeps. Press the play button beneath the speaker located furthest to the left. ![]() If it is not already set to a low volume, drag the magnitude indicator to the lower part of the slider. The "Master output" level must be set to a low volume in order to avoid damage to your ears or speakers.Set the Mic gain to 100%, which is the point between the red and blue areas.Since the filter design algorithm requires that the speakers be measured with a moderate sound pressure level and a noise level as low as possible, it is crucial to do a level calibration of the system before measurement. The microphone should first be positioned in the center of the listening area. Select the calibration microphone that is connected to your computer.You can load your microphone calibration file (.txt) by pressing the button “No microphone calibration” and selecting “Load from file”.All available recording devices will appear in this step.You want the Dirac Live Processor plugin to function as the device that stores the filters. Please select “Dirac Live processor” and proceed. ![]() You can click the “Rescan devices” icon in the upper left corner if you want to refresh the scanning result. Login is required in order to save/restore any project or use purchased features.ĭirac Live will start with scanning the network for compatible devices that will store the filters and process audio data (such as AVRs or the Dirac Live processor audio plugin).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |